Adding/Subtracting Values

Measured values or end results can be added or subtracted using the following measuring functions:

  • Length measurement
  • Area measurement
  • Volume measurement

Adding Values During Length Measurement

  1. Take the first measurement.
  1. Press button (3) .
  1. Take the second measurement.
  • Once the second measurement is completed, the end result is shown at the bottom of the display.

Adding Values During Area and Volume Measurement

  1. Take the first measurement.
  1. Press button (3) .
  1. Take the second measurement.
  • Once the second measurement is completed, the result of the second measurement is shown at the bottom of the display.
  1. Press button (2)  to show the end result.

Subtracting Values

  1. To subtract values, press button (8) . The subsequent steps are the same as for the section on "adding values".