Working Advice
- Check the rotational direction of the drywall screwdriver before beginning screwdriving work. The auto-feed attachment may only be operated in the "clockwise rotational direction" position.
Always work at a right angle to the workpiece.
Switch on the drywall screwdriver and place the depth stop (3) at the point where you want to insert screws. Press against the workpiece surface using a consistent contact pressure until the screw is inserted.
Briefly lifting the depth stop (3) away from the workpiece moves the next screw into the working position.
Screws that have already been inserted cannot be loosened or retightened using the auto-feed attachment. Use the drywall screwdriver without the auto-feed attachment for such cases.
