Basic Settings Menu

The measuring tool offers the following basic settings:

  • Change units of measurement
  • Switch keyboard sounds on/off
  • Switch automatic screen rotation on/off
  • Start calibration
  • Switch slope angle display on/off
  1. Press and hold the (7)  button until the Basic settings menu has opened.
  1. Use buttons (3)  or (8)  to select the required menu item and confirm this by pressing the (7)  button or (2)  button.
  1. Use buttons (3)  or (8)  to change the setting and confirm this by pressing the (7)  button or (2) button.
  • When you confirm a setting, this means that you also exit the Basic settings menu.
  1. To exit the Basic settings menu without changing a setting, press the (5) button .

Changing the Unit of Measurement

The default unit of measurement is "m" (metres).

  1. To access the Basic settings menu, press and hold the (7)  button.
  1. Select .
  1. To change the selection, press the (3)  button or the (8)  button.
  1. To confirm the selection, press the (7)  button or the (2) button.
  1. To exit the menu, press the (5)  button.
  • The selected setting remains saved after you switch off the measuring tool.

Switching Audio Signals On and Off

  1. To access the Basic settings menu, press and hold the (7)  button.
  1. Select .
  1. To change the setting, press the (3)  button or the (8)  button.
  1. To exit the menu, press the (5)  button or the (2)  button.
  • The selected setting remains saved after you switch off the measuring tool.

Switching Automatic Screen Rotation On and Off

When automatic screen rotation is switched on, the display on the screen rotates automatically when you turn the measuring tool.

  1. To access the Basic settings menu, press and hold the (7)  button.
  1. Select .
  1. To change the selection, press the (3)  button or the (8)  button.
  1. To exit the menu, press the (5)  button or the (2)  button.
  • The selected setting remains saved after you switch off the measuring tool.

Showing/Hiding Switch Slope Angle Display

Using the slope angle display, you can ensure that the measuring tool is aligned in the required slope angle. The slope angle indicator on the display can be shown or hidden.

  1. To access the Basic settings menu, press and hold the (7)  button.
  1. Select .
  1. To change the selection, press the (3)  button or the (8)  button.
  1. To exit the menu, press the (5)  button or the (2)  button.
  • The selected setting remains saved after you switch off the measuring tool.