Transport and Storage (see figures C1−C3)

You can push together the saw stand for transporting.

• Press the foot pedal (10) to release the locking hook (11) from the locking bolt (12).
• Pull the handle (1) upwards with both hands until the locking hook (11) engages again.

Lower the saw stand for storage.

• Hold the handle (1) firmly with both hands and place one foot against the foot support (13). Pull back the handle (1) and lower the saw stand onto the ground.

To carry out work, you must set up the saw stand again.

• Press the foot pedal (10) to release the locking hook (11) from the locking bolt (12).
• Pull the handle (1) of the saw stand upwards with both hands and press it forwards until in engages in the upright position.