Technical Data
Angle grinder | GWS 18V-8 | GWS 18V-8 | |
|---|---|---|---|
Article number | 3 601 JN9 0.. | 3 601 JN9 0.. | |
Rated voltage | V= | 18 | 18 |
Rated no-load speedA) | min-1 | 11000 | 11000 |
Max. grinding disc diameter/rubber sanding pad diameter | mm | 115 | 125 |
Grinding spindle thread | M 14 | M 14 | |
Max. thread length of grinding spindle | mm | 22 | 22 |
Kickback stop | ● | ● | |
Restart protection | ● | ● | |
Soft start | ● | ● | |
WeightB) | kg | 1.6 | 1.6 |
Recommended ambient temperature during charging | °C | 0 to +35 | 0 to +35 |
Permitted ambient temperature during operationC) and during storage | °C | –20 to +50 | –20 to +50 |
Compatible rechargeable batteries | GBA18V... | GBA18V... | |
Recommended rechargeable batteries for maximum performance | GBA 18V... ≥ 4.0Ah | GBA 18V... ≥ 4.0Ah | |
Recommended battery chargers | GAL18... | GAL18... |
- A)
Rated no-load speed for the selection of appropriate application tools in accordance with EN IEC 62841-2-3. The actual no-load speed is lower for safety reasons and according to production tolerances.
- B)
With protective guard (11), auxiliary handle (8), mounting flange (14) and clamping nut (20), without battery (you can find the battery weight at www.bosch-professional.com)
- C)
Limited performance at temperatures < 0 °C
Values can vary depending on the product, scope of application and environmental conditions. To find out more, visit www.bosch-professional.com/wac.