Changing the Polishing Disc (see figures B–C)

Note: Replace damaged polishing discs (3) immediately.

Pull off the polishing pad.

Disassembly: Hold the spanner flat (11) on the power tool with the open-ended spanner (10) and turn the polishing disc (3) anticlockwise to remove it (see figure B).

Clean all the parts to be fitted.

Assembly: Hold the spanner flat (11) on the power tool in place with an open-ended spanner (10). Tighten the new polishing disc (3) clockwise (see figure C).

Note: When attaching the polishing pad, make sure that the teeth of the catch mate with the recesses in the polishing disc.