Inserting/Changing the Batteries
Alkali-manganese batteries are recommended for the laser receiver.
- Turn the locking mechanism (14) of the battery compartment cover into position
(e.g. using a coin). - Open the battery compartment cover (13) and insert the batteries.
- When inserting the batteries, ensure that the polarity is correct according to the illustration on the inside of the battery compartment.
- Always replace all the non-rechargeable batteries at the same time. Only use non-rechargeable batteries from the same manufacturer and which have the same capacity.
- Close the battery compartment cover (13) and turn the locking mechanism (14) of the battery compartment cover into position
.
The battery indicator (i) shows the state of charge of the batteries of the laser receiver:
Indicator | Capacity |
|---|---|
| 50 − 100% |
| 5 − 50% |
| 2 − 5% |
| 0 − 2% |
- Take the batteries out of the laser receiver when you are not using it for a prolonged period of time. The batteries can corrode during prolonged storage in the laser receiver.