Product features
The numbering of the product features refers to the diagram of the power tool on the graphics page.
(1) | Handle |
(2) | Lock-off button for on/off switch |
(3) | Protective guard |
(4) | Retracting blade guard |
(5) | Adjustable fence |
(6) | Fence |
(7) | Saw table extension |
(8) | Mounting holes |
(9) | Insert plate |
(10) | Locking clamp |
(11) | Locking knob for all mitre angles |
(12) | Mitre pre-setting lever |
(13) | Clamping handle for all bevel angles |
(14) | Detents for standard mitre angles |
(15) | Recessed handles |
(16) | Hex key (6 mm/4 mm) |
(17) | Hex key (2 mm) |
(18) | Screw clamp |
(19) | Guide roller |
(20) | Angle indicator for right-hand bevel angle range (0° to 47°) |
(21) | Chip deflector |
(22) | Chip ejector |
(23) | Dust extraction adapter |
(24) | Glide mechanism clamping lever |
(25) | Laser warning label |
(26) | Laser protection cap |
(27) | Glide arm |
(28) | Depth stop adjusting screw |
(29) | Depth stop |
(30) | Transport safety lock |
(31) | Scale for bevel angles |
(32) | Angle indicator for left-hand bevel angle range (47° to 0°) |
(33) | Adjustment knob for 22.5° bevel angle |
(34) | Locking screw for length stop |
(35) | Length stop |
(36) | Scale for mitre angles |
(37) | Saw table |
(38) | Rotary knob for adjusting the bevel angle range |
(39) | Saw blade |
(40) | Laser beam outlet aperture |
(41) | Locking screw for the linkage of the retracting blade guard |
(42) | Linkage of the retracting blade guard |
(43) | Front fastening screw |
(44) | Rear fastening screw |
(45) | Cover plate |
(46) | Spindle lock |
(47) | Hex socket screw for mounting the saw blade |
(48) | Clamping flange |
(49) | Inner clamping flange |
(50) | Clamping lever of the saw table extension |
(51) | Locking screw for the adjustable fence |
(52) | Damper |
(53) | Set screws for damping |
(54) | Holes for screw clamp |
(55) | Wing bolt |
(56) | Threaded rod |
(57) | Angle indicator for mitre angles |
(58) | On/off switch |
(59) | On/off switch for laser (cutting line indication) |
(60) | Screws for insert plate |
(61) | Clamping screw for length stop |
(62) | Screw for laser protection cap |
(63) | Set screw for positioning the laser (flush levelling) |
(64) | Fastening screw for laser mounting plate |
(65) | Fastening screw for laser housing |
(66) / | Set screws for 0° basic setting (bevel angle) |
(69) | Set screw for 45° basic setting (left-hand bevel angle) |
(70) | Set screw for 45° basic setting (right-hand bevel angle) |
(71) | Set screws for mitre angle scale |
(72) | Screw for mitre angle indicator |
(73) | Set screw for adjusting the clamping force of the clamping handle for any bevel angle |
(74) | Hook-and-loop strap |