Technical Data
Line laser | GLL 2-10 |
|---|---|
Article number | 3 601 K63 L.. |
Working range at leastA) | 10 m |
Levelling accuracyB)C) | ±0.3 mm/m |
Typical self-levelling range | ±4° |
Typical levelling time | < 4 s |
Operating temperature | –10 °C to +50 °C |
Storage temperature | –20 °C to +70 °C |
Max. altitude | 2000 m |
Relative air humidity max. | 90 % |
Pollution degree according to IEC 61010-1 | 2D) |
Laser class | 2 |
Laser type | < 1 mW, 630−650 nm |
C₆ | 1 |
Divergence | 0.5 mrad (full angle) |
Tripod mount | 1/4"; 5/8" |
Batteries | 3 × 1.5 V LR6 (AA) |
Operating duration in operating modeB) | |
| 9 h |
| 17 h |
Weight according to EPTA-Procedure 01:2014 | 0.49 kg |
Dimensions (length × width × height) | 112 × 55 × 106 mm |
Protection rating | IP54 (dust and splash-proof) |
- A)
The working range may be reduced by unfavourable environmental conditions (e.g. direct sunlight).
- B)
At 20–25 °C
- C)
The values stated presuppose normal to favourable environmental conditions (e.g. no vibration, no fog, no smoke, no direct sunlight). Extreme fluctuations in temperature can cause deviations in accuracy.
- D)
Only non-conductive deposits occur, whereby occasional temporary conductivity caused by condensation is expected.
The serial number (10) on the type plate is used to clearly identify your measuring tool.